Electrical and Electronics Testing
Electrical and electronic products sold in markets around the world need to demonstrate that they function according to existing electrical safety regulations and standards. These standards and regulations differ from country to country, with varying degrees of complexity. Prime Testing Group Ltd. can perform a wide range of analytical, reliability, EMC, radio, safety and energy consumption testing to local and global requirements. We offer the following testing services:
Electrical Safety Testing
Electromagnetic Compatibility (EMC) Testing
R&TTE
Performance and endurance testing
EU RoHS Directive
Resistance to heat and fire
Battery Testing
Sustainability (ErP – Energy related Products, Eco-design, Energy Efficiency, PEP – Product Environmental Profile)
Wireless Communication Devices
ETSI EN 301 489-24 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA
Direct Spread (UTRA and E-UTRA) for Mobile and portable (UE) radio and ancillary equipment
ETSI EN 301 489-25 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 25: Specific conditions for CDMA 1x spread spectrum Mobile Stations and ancillary equipment
IEC 62209-3 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 3: Vector measurement-based systems (Frequency range of 600 MHz to 6 GHz)
Cells, Batteries, and Energy Storage Systems
Batteries for Use in Stationary and Motive Auxiliary Power Applications
UL 1973 Standard for safety - Batteries for use in stationary and motive auxiliary power applications
Battery Energy Storage Systems
UL 9540A Standard for Safety - Test Method for Evaluating Thermal Runaway Fire propagation in battery energy storage systems
Energy Storage Systems and Equipment
ANSI / CAN / UL 9540 Standard for Safety - Energy Storage Systems and Equipment
Secondary Lithium Cells and Batteries for Portable Applications
IEC 61960-3 Secondary cells and batteries containing alkaline or other nonacid electrolytes - Secondary lithium cells and batteries for portable applications
Materials Used in Photovoltaic Modules
IEC TS 62788-2 Measurement procedures for materials used in photovoltaic modules - Part 2: Polymeric materials - Frontsheets and backsheets
Environmental Testing of Electric and Electronic Products
IEC 60068-2-1 Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60068-2-2 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-6 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
IEC 60068-2-11 Environmental testing - Part 2-11: Tests - Test Ka: Salt mist
IEC 60068-2-13 Environmental testing - Part 2-13: Tests - Test M: Low air pressure
IEC 60068-2-14 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60068-2-18 Environmental testing - Part 2-18: Tests - Test R and guidance: Water
IEC 60068-2-27 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 60068-2-30 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12h cycle)
IEC60068-2-31 Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
IEC 60068-2-38 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature / humidity cyclic test
IEC 60068-2-52 Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
IEC60068-2-53 Environmental testing - Part 2-53: Tests and guidance - Combined climatic (temperature / humidity) and dynamic (vibration / shock) tests
IEC 60068-2-64 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
IEC 60068-2-68 Environmental testing - Part 2-68: Tests - Test L: Dust and sand
IEC 60068-2-78 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
Equipment Reliability Testing
IEC 60300-3-5 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles
IEC 60605-2 Equipment reliability testing - Part 2: Design of test cycles
IEC 60605-4 Equipment reliability testing - Part 4: Statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals
IEC 60605-6 Equipment reliability testing - Part 6: Tests for the validity and estimation of the constant failure rate and constant failure intensity
Information Technology
ISO / IEC 18000-2 Information technology - Radio frequency identification for item management - Part 2: Parameters for air interface communications below 135 kHz
ISO / IEC 18000-4 Information technology - Radio frequency identification for item management - Part 4: Parameters for air interface communications at 2,45 GHz
ISO / IEC 18000-6 Information technology - Radio frequency identification for item management - Part 6: Parameters for air interface communications at 860 MHz to 960 MHz - Amendment 1: Extension with Type C and update of Types A and B
ISO / IEC 18000-7 Information technology - Radio frequency identification for item management - Part 7: Parameters for active air interface communications at 433 MHz
ISO / IEC 18047-2 Information technology - Radio frequency identification device conformance test methods - Part 2: Test methods for air interface communications below 135 kHz
ISO / IEC 18047-3 Information technology - Radio frequency identification device conformance test methods - Part 3: Test methods for air interface communications at 13,56 MHz
ISO / IEC TR 18047-4 Information technology - Radio frequency identification device conformance test methods - Part 4: Test methods for air interface communications at 2,45 GHz
ISO / IEC 18047-6 Information technology - Radio frequency identification device conformance test methods - Part 6: Test methods for air interface communications at 860 MHz to 930 MHz
ISO / IEC TR 18047-7 Information technology - Radio frequency identification device conformance test methods - Part 7: Test methods for active air interface communications at 433 MHz
ISO / IEC 22536 Information technology - Telecommunications and information exchange between systems - Near Field Communication Interface and Protocol (NFCIP-1) - RF interface test methods
ISO / IEC 21481 Information technology - Telecommunications and information exchange between systems - Near field communication interface and protocol 2 (NFCIP-2)
ISO / IEC 23917 Telecommunications and information exchange between systems - Near Field Communication Interface and Protocol 1 (NFCIP-1) - Protocol test methods
ISO / IEC 18092 Telecommunications and information exchange between systems - Near Field Communication Interface and Protocol 1 (NFCIP-1)
Cards and Security Devices for Personal Identification
ISO / IEC 10373-6 Cards and security devices for personal identification - Test methods - Part 6: Contactless proximity objects
ISO / IEC 10373-7 Cards and security devices for personal identification - Test methods - Part 7: Contactless vicinity objects
ISO / IEC 14443-2 Cards and security devices for personal identification - Contactless proximity objects - Part 2: Radio frequency power and signal interface
ISO / IEC 14443-3 Cards and security devices for personal identification - Contactless proximity objects - Part 3: Initialization and anticollision
ISO / IEC 14443-4 Cards and security devices for personal identification - Contactless proximity objects - Part 4: Transmission protocol
ISO / IEC 15693-2 Cards and security devices for personal identification - Contactless vicinity objects - Part 2: Air interface and initialization
ISO / IEC 10373-6 Cards and security devices for personal identification - Test methods - Part 6: Contactless proximity objects
Radiofrequency Identification of Animals
ISO 14223-1 Radiofrequency identification of animals - Advanced transponders - Part 1: Air interface
ISO 14223-2 Radiofrequency identification of animals - Advanced transponders - Part 2: Code and command structure
Electro-acoustics
IEC 61672-1 Electroacoustics - Sound level meters - Part 1: Specifications
IEC 60942 Electroacoustics - Sound calibrators
IEC 60645-1 Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone and speech audiometry
IEC 60645-2 Audiometers - Part 2: Equipment for speech audiometry
IEC 61094-5 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
Fire Hazard Testing for Electric and Electronic Products
Glow-wire Flammability Test
IEC 60695-2-11 Fire hazard testing for electric and electronic products - Part 2-11: Glowing / hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
Glow-wire Flammability Index
IEC 60695-2-12 Fire hazard testing for electric and electronic products - Part 2-12: Glowing / hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials
Ball Pressure Test
IEC 60695-10-2 Fire hazard testing for electric and electronic products - Part 10-2: Abnormal heat - Ball pressure test method
Needle Flame Test
IEC 60695-11-5 Fire hazard test for electrical and electronic products Part 11-5: Test flame needle flame test method device, validation test method and guide
Plastics - Burning Characteristics
IEC 60695-11-10 Fire hazard testing for electric and electronic products - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
Insulating and Sheathing Materials of Electric and Optical Cables
Mechanical Properties
IEC 60811-1-1 Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-1: Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties
Thermal Ageing Methods
IEC 60811-1-2 Common test methods for insulating and sheathing materials of electric and optical cables - Part 11-1-2: Methods for general application - Thermal ageing methods
Insulation Shrinkage
IEC 60811-1-3 Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-3: Methods for general application - Measurement for determining the density - Water absorption tests - Shrinkage test
Test at Low Temperature
IEC 60811-1-4 Common test methods for insulating and sheathing materials of electric and optical cables-Part 1-4: Methods for general application - Test at low temperature
Ozone resistance, hot set and mineral oil immersion tests
IEC 60811-2-1 Common test methods for insulating and sheathing materials of electric and optical cables - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests
Resistance to Cracking
IEC 60811-3-1 Common test methods for insulating and sheathing materials of electric and optical cables - Part 3-1: Methods specific to PVC compounds - Pressure test at high temperature - Test for resistance to cracking
Thermal Stability
IEC 60811-3-2 Common test methods for insulating and sheathing materials of electric and optical cables - Part 3-2: Methods specific to PVC compounds - Loss of mass test - Thermal stability test
Cables or Optical Fiber Cables
Smoke Density
IEC 61034-2 Measurement of smoke density of cables or optical fiber cables burning under defined conditions -Part 2: Test procedure and requirements
Halogen Acid Gas Content
IEC 60754-1 Test on gases evolved during combustion of materials from cables or optical fiber cables - Part 1: Determination of the halogen acid gas content
Acidity and Conductivity
IEC 60754-2 Test on gases evolved during combustion of materials from cables or optical fiber cables - Part 2: Determination of acidity (by pH measurement) and conductivity
Polyvinyl Chloride Insulated Cables
IEC 60227-2 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V - Part 2: Test methods
Rubber Insulated Cables
IEC 60245-2 Rubber insulated cables of rated voltages up to and including 450/750V - Part 2: Test methods
Conductor Resistance
IEC 60228 Conductors of insulated cables
Winding Wires
IEC 60851-1 Winding wires - Test methods - Part 1: General
IEC 60851-2 Winding wires - Test methods - Part 2: Determination of dimensions
IEC 60851-3 Winding wires - Test methods - Part 3: Mechanical properties
IEC 60851-4 Winding wires - Test methods - Part 4: Chemical properties
IEC 60851-5 Winding wires - Test methods - Part 5: Electrical properties
IEC 60851-6 Winding wires - Test methods - Part 6: Thermal properties
Anechoic Chamber
ETSI TR 102 273-3 Electromagnetic compatibility and Radio spectrum Matters (ERM); Improvement on Radiated Methods of Measurement (using test site) and evaluation of the corresponding measurement uncertainties -
Part 3: Anechoic chamber with a ground plane
ETSI TS 102 321 Electromagnetic compatibility and Radio spectrum Matters (ERM); Normalized Site Attenuation (NSA) and validation of a fully lined anechoic chamber up to 40 GHz
EN 50147-1 Anechoic chambers - Part 1: Shield attenuation measurement
IEEE/ANSI C63.4 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz
MIL-STD-461G Department of Defense Interface Standard: Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment
Electrical Equipment for Measurement, Control and Laboratory Use
IEC 61326-1 / EN IEC 61326-1 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
IEC 61326-2-1 / EN IEC 61326-2-1 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
IEC 61326-2-2 / EN IEC 61326-2-2 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems
IEC 61326-2-3 / EN IEC 61326-2-3 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
IEC 61326-2-4 / EN IEC 61326-2-4 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
IEC 61326-2-5 / EN IEC 61326-2-5 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1
IEC 61326-2-6 / EN IEC 61326-2-6 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical electrical equipment
IEC 61010-2-010 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-081 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
IEC 61557-9 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems
Railway Applications
IEC 60571 Railway applications - Electronic equipment used on rolling stock
EN 50155 Railway applications - Rolling stock - Electronic equipment
IEC 62236-3-1 Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle
EN 50121-3-1 Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle
IEC 61133 / EN IEC 61133 Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service
Vehicles, Boats and Internal Combustion Engine
Road Vehicles
ISO 7637-2 Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
ISO 7637-3 Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
ISO 11451-2 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Off-vehicle radiation sources
ISO 11451-4 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods
ISO 11452-2 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure
ISO 11452-4 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods
ISO 10605 Road vehicles - Test methods for electrical disturbances from electrostatic discharge
ISO 16750-2 Road vehicles - Environmental conditions and testing for electrical and electronic equipment -
Part 2: Electrical loads
Personal Light Electric Vehicles
EN 17128 Light motorized vehicles for the transportation of persons and goods and related facilities and not subject to type-approval for on-road use - Personal light electric vehicles (PLEV) - Requirements and test methods
Electric Bicycles
EN 15194 Cycles - Electrically power assisted cycles - EPAC Bicycles
Limits and Methods of Measurement for the Protection of Off-board Receivers
CISPR 12 Vehicles, boats and internal combustion engine - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers
Limits and Methods of Measurement for the Protection of On-board Receivers
CISPR 25 Vehicles, boats and internal combustion engines – Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers
Miscellaneous
Industrial, Scientific and Medical Equipment
CISPR 11 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
Household Appliances, Electric Tools and Similar Apparatus
CISPR 14 Limits and methods of measurement of radio interference characteristics of household electrical appliances, portable tools and similar electrical apparatus
CISPR 14-1 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
CISPR 14-2 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard
Electrical Lighting and Similar Equipment
CISPR 15 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Radio Disturbance and Immunity Measuring Apparatus
CISPR 16-1-4 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements
CISPR 16-1-5 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz
CISPR 16-2-1 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements
CISPR 16-2-2 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power
CISPR 16-2-3 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
Information Technology Equipment
CISPR 22 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
Multimedia Equipment
CISPR 32 / EN IEC 50032 Electromagnetic compatibility of multimedia equipment - Emission requirements
CISPR 35 / EN IEC 55035 Electromagnetic compatibility of multimedia equipment - Immunity requirements
Electricity Metering Equipment
IEC 62052-11 Electricity metering equipment - General requirements, tests and test conditions - Part 11: Metering equipment
IEC 62053-41 Electricity metering equipment - Particular requirements - Part 41: Static meters for DC energy (classes 0,5 and 1)
Ultrasonic Test Equipment
ISO 22232-1 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments
Rotating electrical machines
IEC 60034-5 Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
Cabinets and Subracks
IEC 61587-3 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets and subracks
Bypass Diode
IEC TS 62916 Photovoltaic modules - Bypass diode electrostatic discharge susceptibility testing
Relays
IEC 60255-21-1 Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section One: Vibration tests (sinusoidal)
IEC 60255-27 Measuring relays and protection equipment - Part 27: Product safety requirements
Touch Current and Protective Conductor Current
IEC 60990 Methods of measurement of touch current and protective conductor current
Electromagnetic Compatibility (EMC) Regulations for Electrical and Electronic Products
1. European Union (EU)
Directive 2014/30/EU (EMC Directive)
- Governs EMC requirements for electrical / electronic equipment marketed in the EU.
- Excludes radio equipment (covered by Directive 2014/53/EU) and certain specialized products.
Harmonized Standards
- EN 55014-1 / EN 55014-2: Household appliances, tools, lighting.
- EN 55032: Multimedia equipment (IT, AV).
- EN 61000 series: Immunity standards (e.g., EN 61000-4-2 for ESD, EN 61000-4-3 for radiated immunity).
2. United States
Federal Communications Commission (FCC) Part 15 Rules (47 CFR Part 15).
- Covers intentional radiators (Wi-Fi, Bluetooth) and unintentional radiators (computers, TVs, appliances).
Standards
- ANSI C63.4: Measurement procedures for unintentional radiators.
- ANSI C63.10: Testing of intentional radiators.
- CISPR 11/22 equivalents often referenced.
3. Canada
EMC regulations in Canada are governed by Innovation, Science and Economic Development Canada (ISED), formerly Industry Canada. Mandatory compliance requires, at minimum, a Declaration of Conformity for most devices (e.g., ICES-003 for digital apparatus) or formal certification for radio equipment, ensuring electromagnetic emissions do not exceed specified, often ANSI-based, limits.
Key Standards
- ICES-001: Industrial, scientific, and medical (ISM) radio frequency generators.
- ICES-003: Information Technology Equipment (ITE) and digital apparatus (computers, TVs, AV equipment).
- ICES-Gen: General EMC requirements.
- ICES-005: Lighting equipment.
4. Australia
Australian Communications and Media Authority (ACMA)
Under the Australian Communications Authority regulations, devices must comply with EMC requirements outlined in the EMC Framework.
Regulatory Compliance Mark (RCM)
The RCM mark is mandatory for EMC, safety, and telecommunications compliance.
Standards
- CISPR 14-1 / CISPR 14-2: Household appliances.
- CISPR 32: Multimedia equipment.
- AS/NZS 61000 series: Immunity standards.
5. Japan
Voluntary Control Council for Interference by Information Technology Equipment (VCCI)
VCCI establishes standards for EMC compliance in Japan, primarily targeting information technology equipment, but extending to many consumer electronics. Although it is voluntary, it is widely adopted for IT and AV equipment. Products displaying VCCI mark indicate conformity to the EMC requirements.
Standards
- VCCI Class A: Industrial / commercial environments.
- VCCI Class B: Residential environments.
- Based on CISPR 32 principles.
6. Korea
The National Radio Research Agency (RRA) under the Ministry of Science, ICT and Future Planning (MSIP) regulates EMC through the KC Certification Scheme.
Products displaying KC mark indicate conformity to the EMC requirements.
Standards
- KN 32: Multimedia equipment.
- KN 35: Household appliances.
- Based on CISPR standards with Korean adaptations.
Common Standards on Electromagnetic Compatibility
IEC 61000-3-2 / EN IEC 61000-3-2 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
IEC 61000-3-3 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection
IEC 61000-4-2 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3 Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
IEC 61000-4-4 Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
IEC 61000-4-5 Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
IEC 61000-4-6 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
IEC 61000-4-8 Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
IEC 61000-4-9 Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test
IEC 61000-4-10 Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test
IEC 61000-4-11 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
IEC 61000-4-12 Electromagnetic Compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test
IEC 61000-4-18 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test
IEC 61000-4-28 Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase
IEC 61000-4-29 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
IEC 61000-6-1 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
IEC 61000-6-2 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
IEC 61000-6-3 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments
IEC 61000-6-4 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
