Regulatory Information
International standards / Regulations for various tests are listed below:
ASTM D4685 Standard Test Method for Pile Fabric Abrasion
Determination of free formaldehyde with reference to 90/207/EEC
Compression Test (up to 4000kg)
Scanning Electron Microscope (SEM) Services
ASTM F1927
Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
Oedometer Test:
BS 1377-5 Methods of test for soils for civil engineering purposes. Compressibility, permeability and durability tests
ASTM F2999
Standard Consumer Safety Specification for Adult Jewelry
Assessment for Allergenic Fragrances (2009/48/EC Annex II, Point 11 & 12)
ASTM C1028
Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
ASTM F1249
Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
ASTM C1253
Standard Test Method for Determining the Outgassing Potential of Sealant Backing
ASTM D5249
Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints
ASTM D3575
Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers
ASTM C1016
Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material
ASTM C240
Standard Test Methods for Testing Cellular Glass Insulation Block
ASTM E1131
Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM D2022
Standard Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches
ISO 13934-1
Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
ISO 13934-2
Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method
BS EN 10025-2
Hot rolled products of structural steels. Technical delivery conditions for non-alloy structural steels
BS EN ISO 6892-1
Metallic materials. Tensile testing. Method of test at room temperature
BS EN 10255
Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions
BS 1377-1
Methods of test for soils for civil engineering purposes. General requirements and sample preparation
BS 4551
Mortar. Methods of test for mortar and screed. Chemical analysis and physical testing
ASTM D3120
Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
IEC 62471
Photobiological safety of lamps and lamp systems
FDA Macroanalytical Procedures Manual (MPM) V-12
UL 197 Commercial Electric Cooking Appliances
